JRC JCY-1800 Instruction Manual page 36

4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
4.4.4. Detail setup window of Speed data (CH34）
4.4.4.1. Identification TAB screen
Set an identification data of connected equipment which output a Pulse signal as ship's speed data.
1) Equipment
Enter the name of the connecting equipment. (Speed log, etc.)
2) Model
Enter the model name of the connecting equipment.
3) Manufacturer
Enter the name of the manufacturer of the connecting equipment.
4) Serial No.
Enter the serial number of the connecting equipment.
* The old equipment by which the serial number is not displayed also exists. In that case, enter "unknown" into
the Serial No. column.
4.4.4.2. Ship's Speed TAB screen
4.4.4.2.1. Pulse
Select pulse rate in 100, 160, 200, or 400 kt/pulse.
DOC No. 7ZPNA4014
30