Removing The Oil Pan; Checking The Oil Strainer; Installing The Oil Pan - Yamaha FZ09E 2014 Service Manual

Table of Contents

Advertisement

EAS24930

REMOVING THE OIL PAN

1. Remove:
• Oil level switch "1"
• Oil pan "2"
• Oil pan gasket
TIP
Loosen each bolt 1/4 of a turn at a time, in stag-
es and in a crisscross pattern. After all of the
bolts are fully loosened, remove them.
2
EAS24990

CHECKING THE OIL STRAINER

1. Check:
• Oil strainer "1"
Damage  Replace.
Contaminants  Clean with solvent.
EAS25050

INSTALLING THE OIL PAN

1. Install:
• Gasket
New
• Oil pan "1"
Oil pan bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
• Oil level switch "2"
Oil level switch bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
• Engine oil drain bolt "3"
1
1
5-55
Engine oil drain bolt
43 Nm (4.3 m·kgf, 31 ft·lbf)
EWA12820
WARNING
Always use new copper washers.
TIP
• Tighten the oil pan bolts in stages and in a
crisscross pattern.
• Lubricate the oil level switch O-ring with lithi-
um-soap-based grease.
1
OIL PAN
2
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fz09ec 2014

Table of Contents