Changing The Engine Oil - Yamaha FZ09E 2014 Service Manual

Recommended brand
YAMALUBE
Type
SAE 10W-30, 10W-40, 10W-50,
15W-40, 20W-40 or 20W-50
Recommended engine oil grade
API service SG type or higher,
JASO standard MA
–20 –10 0 10
ECA13361
NOTICE
• Engine oil also lubricates the clutch and the
wrong oil types or additives could cause
clutch slippage. Therefore, do not add any
chemical additives or use engine oils with a
grade of "CD" or higher and do not use oils
labeled "ENERGY CONSERVING II" or
higher.
• Do not allow foreign materials to enter the
crankcase.
TIP
Before checking the engine oil level, wait a few
minutes until the oil has settled.
4. Start the engine, warm it up for several min-
utes, and then turn it off.
5. Check the engine oil level again.
TIP
Before checking the engine oil level, wait a few
minutes until the oil has settled.
EAS20791

CHANGING THE ENGINE OIL

1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine oil drain
3. Remove:
• Engine oil filler cap "1"
• Engine oil drain bolt "2"
b
a • Gasket "3"
4. Drain:
• Engine oil
5. If the oil filter cartridge is also to be replaced,
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the oil filter cartridge "1" with an oil
b. Lubricate the O-ring "3" of the new oil filter
3-23
PERIODIC MAINTENANCE
bolt.
1
(completely from the crankcase)
perform the following procedure.
filter wrench "2".
Oil filter wrench
90890-01426
YU-38411
2 1
cartridge with a thin coat of engine oil.
3
2