Checking The Connecting Arm And Relay Arm; Checking The Engine Oil Level - Yamaha FZ09E 2014 Service Manual

the owner's tool kit.
b. Turn the adjusting ring "3" in direction "a" or
"b".
c. Align the desired position on the adjusting
ring with the stopper "4".
Direction "a"
Spring preload is increased (suspension
is harder).
Direction "b"
Spring preload is decreased (suspension
is softer).
Spring preload adjusting positions
Minimum
1
Standard
4
Maximum
7
2
3 2 1
7 6 5 4
4
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Rebound damping
ECA13590
NOTICE
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
• Rebound damping
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Turn the adjusting screw "1" in direction "a" or
"b".
Direction "a"
Rebound damping is increased (suspen-
sion is harder).
Direction "b"
Rebound damping is decreased (suspen-
sion is softer).
1
3
a
b
3-22
PERIODIC MAINTENANCE
Rebound damping adjusting posi-
tions
Minimum (soft)
3 turn(s) in direction "b"*
Standard
1 1/2 turn(s) in direction "b"*
Maximum (hard)
Adjusting screw fully turned in
direction "a"
* With the adjusting screw fully turned in
direction "a"
TIP
To obtain a precise adjustment, it is advisable to
check the actual total number of turns of the
damping force adjusting mechanism. This ad-
justment range may not exactly match the spec-
ifications listed due to small differences in
production.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS1RC1312
CHECKING THE CONNECTING ARM AND
RELAY ARM
Refer to "CHECKING THE CONNECTING ARM
AND RELAY ARM" on page 4-64.
EAS20731

CHECKING THE ENGINE OIL LEVEL

1. Stand the vehicle on a level surface.
TIP
• Place the vehicle on a suitable stand.
• Make sure the vehicle is upright.
2. Start the engine, warm it up for several min-
utes, and then turn it off.
3. Check:
• Engine oil level
The engine oil level should be between the
minimum level mark "a" and maximum level
mark "b".
Below the minimum level mark  Add the
recommended engine oil to the proper level.
b 1 a