Yamaha FZ09E 2014 Service Manual page 327

m. Check the meter display value. If the meter
display value is not 97–107, adjust the accel-
erator position sensor angle.
n. Select the diagnostic code number "15".
o. Turn the throttle grip to the fully closed posi-
tion.
p. Check the meter display value. If the meter
display value is not 10–24, adjust the acceler-
ator position sensor angle.
q. Turn the throttle grip to the fully open position.
r. Check the meter display value. If the meter
display value is not 95–109, adjust the accel-
erator position sensor angle.
s. Repeat steps (h) to (r) until the meter display
values are within the specified ranges.
t. If the meter display values are not within the
specified ranges after repeating steps (h) to
(r) several times, replace the accelerator po-
sition sensor.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
THROTTLE BODIES
7-14