1. Rear frame
2. Clamp
3. Rear brake caliper
4. Rear brake hose
5. Swingarm assembly
A. Install the clamp facing the direction in the illustra-
tion.
B. Make sure to install the clamp all the way in the
rear frame.
C. Fasten the protector of the brake hose with the
clamp. Install the mating section on the top of the
vehicle.
D. Make sure to install the clamp all the way in the
swingarm assembly.
E. Install the brake pipe so that it aligned with the cut-
out in the caliper.
2-68
CABLE ROUTING