Yamaha FZ09E 2014 Service Manual page 81

1. Radiator cap
2. Radiator
3. Radiator fan
4. Radiator outlet hose
5. Thermostat assembly
6. Water jacket joint
7. Coolant reservoir
8. Radiator inlet hose
A. Install the radiator outlet hose with its white paint
mark facing inward.
B. Install the radiator outlet hose up to the base of the
bend in the radiator pipe.
C. Point the hose clamp installation bolt inward.
D. Point the end of the hose clip downward.
E. Align the yellow paint mark of the radiator outlet
hose with the rib of the thermostat assembly, and
then install it.
F. Install the radiator outlet hose so that the tip of the
hose contacts the rib of the thermostat assembly.
G. Install the radiator inlet hose so that the tip of the
hose contacts the rib of the water jacket joint.
H. Install the radiator inlet hose with its yellow paint
mark facing downward.
I. Point the hose clamp installation bolt upward.
J. Install the radiator inlet hose up to the base of the
bend in the radiator pipe.
K. Install the radiator inlet hose with its white paint
mark facing inward.
L. Install the radiator hose up to the base of the bend
in the radiator pipe.
M. Point the end of the clip outward.
N. Install the coolant reservoir hose up to the base of
the bend in the radiator pipe.
O. Point the end of the clip rearward.
P. Install the grommet on the coolant reservoir drain
hose to the hole in the coolant reservoir cover.
Q. 90
R. Place the lock of the hose clamp within the area
shown in the illustration, placing as close to the
center as possible.
S. Point the tip of the clamp rearward.
2-46
CABLE ROUTING