Yamaha FZ09E 2014 Service Manual page 457

SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE
Diagnostic
code No.
67 ISC (idle speed control)
learning condition display
ISC (idle speed control)
learning data erasure
70 Control number
Diagnostic code: actuator operation table
Diagnostic
code No.
30 Cylinder-#1 ignition coil
31 Cylinder-#2 ignition coil
32 Cylinder-#3 ignition coil
36 Injector #1
37 Injector #2
38 Injector #3
Item
00
ISC (idle speed control)
learning data has been
erased.
01
It is not necessary to
erase the ISC (idle speed
control) learning data.
02
It is necessary to erase
the ISC (idle speed con-
trol) learning data.
0–254 [-]
Item
Actuates the cylinder-#1
ignition coil five times at
one-second intervals.
Illuminates the engine
trouble warning light.
Actuates the cylinder-#2
ignition coil five times at
one-second intervals.
Illuminates the engine
trouble warning light.
Actuates the cylinder-#3
ignition coil five times at
one-second intervals.
Illuminates the engine
trouble warning light.
Actuates the injector #1
five times at one-second
intervals.
Illuminates the engine
trouble warning light.
Actuates the injector #2
five times at one-second
intervals.
Illuminates the engine
trouble warning light.
Actuates the injector #3
five times at one-second
intervals.
Illuminates the engine
trouble warning light.
9-10
Meter display
To erase the ISC (idle
speed control) learning
data, set the start/engine
stop switch from " " to
" " 3 times in 5 seconds.
—
Actuation
Check that a spark is gen-
erated five times.
Check that a spark is gen-
erated five times.
Check that a spark is gen-
erated five times.
Check that injector #1 is
actuated five times by lis-
tening for the operating
sound.
Check that injector #2 is
actuated five times by lis-
tening for the operating
sound.
Check that injector #3 is
actuated five times by lis-
tening for the operating
sound.
Procedure
Procedure
• Connect an ignition
checker.
• Connect an ignition
checker.
• Connect an ignition
checker.