Changing The Coolant - Yamaha FZ09E 2014 Service Manual

7
2
5
4
EAS21131

CHANGING THE COOLANT

1. Remove:
• Radiator cap bolt "1"
• Radiator cap "2"
• Radiator cap stopper "3"
EWA13030
WARNING
A hot radiator is under pressure. Therefore,
do not remove the radiator cap when the en-
gine is hot. Scalding hot fluid and steam may
be blown out, which could cause serious in-
jury. When the engine has cooled, open the
radiator cap as follows:
Place a thick rag or a towel over the radiator
cap and slowly turn the radiator cap counter-
clockwise toward the detent to allow any re-
sidual pressure to escape. When the hissing
sound has stopped, press down on the radi-
ator cap and turn it counterclockwise to re-
move.
2. Remove:
• Coolant reservoir bolts "1"
1
8
3
3. Remove:
6
4. Drain:
5. Remove:
6. Drain:
7. Install:
1
2
3
8. Install:
3-26
PERIODIC MAINTENANCE
• Coolant reservoir cover "2"
• Coolant reservoir "3"
• Collars "4"
3
4
• Coolant reservoir cap "1"
• Coolant
(from the coolant reservoir)
• Water pump drain bolt "1"
• Copper washer "2"
1 2
• Coolant
(from the engine and radiator)
• Water pump drain bolt
• Copper washer
New
Water pump drain bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
• Collars
1
4
1
2
1