Table of Contents
Advertisement
EAS30380
BASIC SERVICE INFORMATION
EAS30390
QUICK FASTENERS
Rivet type
1. Remove:
• Quick fastener
TIP
To remove the quick fastener, push its pin with a
screwdriver, then pull the fastener out.
2. Install:
• Quick fastener
TIP
To install the quick fastener, push its pin so that
it protrudes from the fastener head, then insert
the fastener into the part to be secured and push
the pin "a" in with a screwdriver. Make sure that
the pin is flush with the fastener's head.
Screw type
1. Remove:
• Quick fastener
TIP
To remove the quick fastener, loosen the screw
with a screwdriver, then pull the fastener out.
BASIC SERVICE INFORMATION
2. Install:
• Quick fastener
TIP
To install the quick fastener, insert the fastener
into the part to be secured and tighten the screw
"a".
EAS30401
ELECTRICAL SYSTEM
Electrical parts handling
ECA16600
NOTICE
Never disconnect a battery lead while the en-
gine is running; otherwise, the electrical
components could be damaged.
ECA16750
NOTICE
When disconnecting the battery leads from
1-13
Advertisement
Chapters
Table of Contents
