Yamaha FZ09E 2014 Service Manual page 16

Average fuel consumption mode
1. Average fuel consumption display
The average fuel consumption display can be
set to either "AVE_ _._ km/L", "AVE_ _._ L/100
km" or "AVE_ _._ MPG".
This display shows the average fuel consump-
tion since it was last reset.
• "AVE_ _._ km/L": The average distance that
can be traveled on 1.0 L of fuel is shown.
• "AVE_ _._ L/100 km": The average amount of
fuel necessary to travel 100 km is shown.
• "AVE_ _._ MPG": The average distance that
can be traveled on 1.0 US gal of fuel is shown.
To switch between the average fuel consump-
tion displays, push the "SELECT" button for one
second when one of the displays is shown.
To reset the average fuel consumption display,
select it by pushing the "SELECT" button, and
then push the "RESET" button for at least one
second.
TIP
After resetting an average fuel consumption dis-
play, "_ _._" is shown for that display until the ve-
hicle has traveled 1 km (0.6 mi).
Coolant temperature display
1
1. Coolant temperature display
This display shows the coolant temperature from
104 F to 242 F in 1 F increments.
If the message "HI" flashes, stop the vehicle,
then stop the engine, and let the engine cool.
1
TIP
• When the coolant temperature is below 104 F,
"LO" will be displayed.
• The coolant temperature varies with changes
in the weather and engine load.
Air intake temperature display
1. Air intake temperature display
The air intake temperature display indicates the
temperature of the air drawn into the air filter
case.
This display shows the air intake temperature
from 14 F to 210 F in 1 F increments.
TIP
• 14 F will be displayed even if the air intake
temperature falls below 14 F.
• The air intake temperature may vary from the
ambient temperature.
Self-diagnosis device
1
1. Error code display
2. Engine trouble warning light "
This model is equipped with a self-diagnosis de-
vice for various electrical circuits.
If a problem is detected in any of those circuits,
the engine trouble warning light will come on and
the display will indicate an error code.
If the display indicates any error codes, note the
code number, and then check the fuel injection
system. (Refer to "FUEL INJECTION SYSTEM"
on page 8-31.)
1-7
FEATURES
1
2
"