1. Frame
2. Fuel tank
3. Fuel pump
4. Fuel tank drain hose
5. Fuel tank breather hose
6. Clip
7. Fuel hose assembly
A. Insert the fuel tank drain hose up to the section
where the fuel tank pipe increases in diameter.
Install it so that the white paint mark faces the
rearward.
B. Install the clip so that the end is on the paint mark.
Do not put it on the clip spool (guard). Point the
end to the rear, and store it inside to the fuel hose.
C. Align the fuel pump positioning to the inner panel
marking (visual guide during installation).
D. Insert the fuel tank breather hose up to the section
where the fuel tank pipe increases in diameter.
Install it so that the yellow paint mark faces the
rearward.
2-48
CABLE ROUTING