7. Check:
• Bearing
• Oil seal
Damage/wear Replace the starter motor.
EAS24800
ASSEMBLING THE STARTER MOTOR
1. Install:
• Brush holder set
• Insulator "1"
TIP
Install the insulator as shown in the illustration.
2. Install:
• Rear cover "1"
• Starter motor yoke "2"
• Front cover "3"
TIP
Align the match marks "a" on the starter motor
yoke with the match marks "b" on the front and
rear cover.
b
a
1
2
EAS24810
INSTALLING THE STARTER MOTOR
1. Install:
• Starter motor "1"
• Negative battery lead "2"
• Starter motor bolts "3"
TIP
Install the negative battery lead as shown in the
illustration.
Starter motor bolt
12 Nm (1.2 m·kgf, 8.7 ft·lbf)
2. Connect:
• Starter motor lead
1
b
3
5-38
ELECTRIC STARTER
1
2
45˚
3