Yamaha FZ09E 2014 Service Manual page 153

3. Lubricate:
• Oil seal lips
Recommended lubricant
Lithium-soap-based grease
4. Install:
• Collars
• Front wheel
• Wheel axle
5. Tighten:
• Wheel axle
• Wheel axle pinch bolt
Wheel axle
65 Nm (6.5 m·kgf, 47 ft·lbf)
Wheel axle pinch bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
ECA1RC1401
NOTICE
Before tightening the wheel axle, push down
hard on the handlebar several times and
check if the front fork rebounds smoothly.
TIP
Check that wheel axle end "a" is flush with front
folk surface "b" and then tighten the wheel axle
pinch bolt. If end "a" is not flush with surface "b",
align the ends manually or with a plastic ham-
mer.
b
a
6. Install:
• Front brake calipers
Front brake caliper bolt
35 Nm (3.5 m·kgf, 25 ft·lbf)
EWA13500
WARNING
Make sure the brake hose is routed properly.
4-13
FRONT WHEEL