Installing The Fuel Tank - Yamaha FZ09E 2014 Service Manual

Fuel pump bolt
4.0 Nm (0.40 m·kgf, 2.9 ft·lbf)
TIP
• Do not damage the installation surfaces of the
fuel tank when installing the fuel pump.
• Always use a new fuel pump gasket.
• Install the fuel pump gasket so that the lip side
turns to the inside of the fuel tank.
• Install the fuel pump as shown in the illustra-
tion.
• Align the projection "a" on the fuel pump with
the slot in the fuel pump bracket.
• Tighten the fuel pump bolts in the proper tight-
ening sequence as shown.
4
A
2
A. Forward
EAS1RC1704

INSTALLING THE FUEL TANK

1. Connect:
• Fuel hose (fuel tank side)
ECA1RC1708
NOTICE
When installing the fuel hose, make sure that
it is securely connected, and that the fuel
hose connector cover on the fuel hose is in
the correct position, otherwise the fuel hose
will not be properly installed.
TIP
• Install the fuel hose securely onto the fuel
pump until a distinct "click" is heard.
• To install the fuel hose onto the fuel pump,
slide the fuel hose connector cover "1" on the
end of the hose in the direction of the arrow
shown.
• It is prohibited to wear the cotton work gloves
or equivalent coverings.
a
1
3
7-4
2. Connect:
• Fuel tank breather hose
• Fuel tank drain hose
• Fuel pump coupler
FUEL TANK