Checking The Connecting Arm And Relay Arm; Checking The Engine Oil Level - Yamaha XSR 900 2022 Service Manual

Rebound damping
ECA13590
NOTICE
Never go beyond the maximum or minimum
adjustment positions.
1. Remove:
• Cover "1"
2. Adjust:
• Rebound damping
a. Turn the adjusting screw "1" in direction "a"
or "b".
Direction "a"
Rebound damping is increased (sus-
pension is harder).
Direction "b"
Rebound damping is decreased (sus-
pension is softer).
Rebound damping
Adjustment value from the start
position (Soft)
2+1/2
Adjustment value from the start
position (STD)
1
Adjustment value from the start
position (Hard)
0
* Start position: With the adjusting screw
fully turned in direction "a"
TIP
Although the total number of turns of a damping
force adjusting mechanism may not exactly
match the above specifications due to small dif-
ferences in production, the actual number of
turns always represents the entire adjusting
range. To obtain a precise adjustment, it would
be advisable to check the number of turns of
each damping force adjusting mechanism and
to modify the specifications as necessary.
1
3-24
PERIODIC MAINTENANCE
b a
1
EAS30809
CHECKING THE CONNECTING ARM AND
RELAY ARM
Refer to "CHECKING THE CONNECTING ARM
AND RELAY ARM" on page 4-82.
EAS30656

CHECKING THE ENGINE OIL LEVEL

1. Stand the vehicle on a level surface.
TIP
• Place the vehicle on a maintenance stand.
• Make sure the vehicle is upright.
2. Start the engine, warm it up for several min-
utes, and then turn it off.
3. Check:
• Engine oil level
The engine oil level should be between the
minimum level mark "a" and maximum level
mark "b".
Below the minimum level mark → Add the
recommended engine oil to the proper level.
Recommended brand
YAMALUBE
SAE viscosity grades
10W-40
Recommended engine oil grade
API service SG type or higher,
JASO standard MA
b
a