HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Manual page 19

Step
Assign a username to the
4.
CHAP authenticator.
Configure local or remote
5.
AAA authentication.
To configure the supplicant:
Step
Enter system view.
1.
Enter interface view.
2.
Assign a username to the
3.
CHAP supplicant.
Configure local or remote
4.
AAA authentication.
•
Configuring CHAP authentication when no authenticator name is configured
To configure the authenticator:
Step
Enter system view.
1.
Enter interface view.
2.
Configure the local device to
3.
authenticate the supplicant by
using CHAP.
Command
ppp chap user username
For local AAA authentication,
the username and password of
the supplicant must be
configured on the authenticator.
For remote AAA authentication,
the username and password of
the supplicant must be
configured on the remote AAA
server.
For more information about
AAA authentication, see
Security Configuration Guide.
Command
system-view
interface interface-type
interface-number
ppp chap user username
For local AAA authentication, the
username and password of the
supplicant must be configured on
the authenticator.
For remote AAA authentication,
the username and password of
the supplicant must be configured
on the remote AAA server.
For more information about AAA
authentication, see Security
Configuration Guide.
Command
system-view
interface interface-type
interface-number
ppp authentication-mode chap
[ [ call-in ] domain isp-name ]
8
Remarks
The username you assign to the
authenticator must be the same
as the local username you
assign to the authenticator on
the supplicant.
The username configured for
the supplicant must be the same
as that configured on the
supplicant.
The passwords configured for
the authenticator and supplicant
must be the same.
Remarks
N/A
N/A
The username you assign to
the supplicant here must be the
same as the local username
you assign to the supplicant on
the authenticator.
The username configured for
the supplicant must be the
same as that configured on the
supplicant.
The passwords configured for
the authenticator and
supplicant must be the same.
Remarks
N/A
N/A
By default, PPP
authentication is disabled.