Configuring Isdn To Carry The Connected-Name Field In Outgoing Packets; Configuring Isdn To Carry The Channel-Id Field For Only Once In The Responses; Configuring The Service Type In The Isdn Bearer Compatibility Signaling - HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Manual

Step
Configure ISDN to carry the
3.
Calling-Name field in
outgoing packets.
Configuring ISDN to carry the Connected-Name
field in outgoing packets
Step
Enter system view.
1.
Enter interface view.
2.
Configure ISDN to carry the
3.
Connected-Name field in
outgoing packets.
Configuring ISDN to carry the Channel-ID field for
only once in the responses
Step
Enter system view.
1.
Enter interface view.
2.
Configure ISDN to carry the
3.
Channel-ID field for only
once in the responses.
Configuring the service type in the ISDN bearer
compatibility signaling
This feature is available only on voice interfaces such as BSV, VE1, and VT1 interfaces.
The bearer compatibility field in the ISDN signaling specifies the service type of the ISDN bearer. The
following service types are supported:
•
Speech—Specifies the speech service.
•
audio—Specifies the 3.1 kHz audio.
•
data—Specifies the unrestricted digital information.
The default service type is speech. You can change the service type to audio or data as needed.
To configure the service type in the ISDN bearer compatibility signaling:
Command
isdn carry calling-name
Command
system-view
interface interface-type
interface-number
isdn carry connected-name
Command
system-view
interface interface-type
interface-number
isdn carry channel-id
once-only
72
Remarks
Optional.
By default, ISDN does not carry the
Calling-Name field in outgoing
packets.
Remarks
N/A
N/A
Optional.
By default, ISDN does not carry the
Connected-Name field in outgoing
packets.
Description
N/A
N/A
Optional.
By default, ISDN carries the
Channel-ID field in all responses.