HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Manual page 71

Step
13. Configure ISDN B channel
selection mode.
14. Configure ISDN BRI sliding
window size.
15. Configure statistics about
ISDN message receiving
and sending.
16. Configure the allowed
incoming calling number.
17. Configure
Progress-to-Alerting
conversion.
18. Configure ISDN to carry the
Calling-Name field in
outgoing packets.
19. Configure ISDN to carry the
Connected-Name field in
outgoing packets.
20. Configure ISDN to carry the
Channel-ID field for only
once in the response.
21. Configure the service type in
the ISDN bearer
compatibility signaling.
22. Configure the progress
indicator value in the ISDN
signaling.
23. Configure TEI treatment on
the BRI interface.
24. Configure ISDN BRI leased
line.
25. Configure permanent link
function on ISDN BRI link
layer.
26. Specify an ISDN BRI
interface to be in permanent
active state on physical layer
27. Configure deactivation
protection for the ISDN BRI
interface.
28. Enable remote powering on
an ISDN BRI interface
Command
"Configuring ISDN B channel
See
selection mode."
"Configuring the sliding
See
window size on a BRI interface."
"Collecting ISDN message
See
statistics."
"Configuring an interface to
See
check the calling number when an
incoming call comes."
See "Configuring
progress-to-alerting conversion."
"Configuring ISDN to carry
See
the Calling-Name field in outgoing
packets."
"Configuring ISDN to carry
See
the Connected-Name field in
outgoing packets."
"Configuring ISDN to carry
See
the Channel-ID field for only once
in the responses."
"Configuring the service type
See
in the ISDN bearer compatibility
signaling."
"Setting the progress indicator
See
value in ISDN signaling
messages."
"Configuring TEI treatment on
See
the BRI interface."
"Configuring an ISDN BRI
See
leased line."
"Configuring permanent link
See
function at ISDN BRI link
"Configuring an ISDN BRI
See
interface to be in permanent active
state on physical layer."
"Configuring deactivation
See
protection for an ISDN BRI
interface."
"Enabling remote powering
See
on an ISDN BRI interface."
60
Remarks
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
layer."
Optional.
Optional.
Optional.