Step
Configure an X.25-to-IP X2T
5.
forwarding route.
Configure an IP-to-X.25 X2T
6.
forwarding route.
Displaying and maintaining LAPB and X.25
Task
Display the X.25 alias table.
Display the X.25 address
mapping table.
Display CUG configurations.
Display X.25 Packet
Assembler/Disassembler (PAD)
connection information.
Display the X.25 switching table.
Display the X.25 PVC switching
table.
Command
translate x25 x.121-address ip
ip-address port port-number
•
Configure a PVC forwarding
route for a PVC link:
translate ip ip-address port
port-number pvc
interface-type
interface-number
pvc-number
•
Configure an SVC route and
a forwarding route for an
SVC link:
a. translate ip ip-address
port port-number x25
x.121-address
b. x25 switch svc
[ -number ]
x.121-address
[ sub-dest
destination-address ]
[ sub-source
source-address ] *
interface interface-type
interface-number [ dlci
dlci-number ]
Command
display x25 alias-policy
[ interface interface-type
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
display x25 map [ | { begin |
exclude | include }
regular-expression ]
display x25 cug { local-cug
[ local-cug-number ] |
network-cug
[ network-cug-number ] } [ |
{ begin | exclude | include }
regular-expression ]
display x25 pad [ pad-id ] [ |
{ begin | exclude | include }
regular-expression ]
display x25 switch-table svc
{ dynamic | static } [ | { begin |
exclude | include }
regular-expression ]
display x25 switch-table pvc [ |
{ begin | exclude | include }
regular-expression ]
341
Remarks
N/A
N/A
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Need help?
Do you have a question about the FlexNetwork MSR Series and is the answer not in the manual?