Svc Application Of Xot - HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Manual

Packet Size: input 128
Local PS: 5
Local Busy: FALSE
Input/Output:
DATA 5/5
RR 0/0
Bytes 420/420
Send Queue(Current/Max): 0/200
# Display the X.25 SVC switching table of Router D.
[RouterD] display x25 switch-table svc static
Number Destination
1 100
2 200
3 300
Total of static svc is 3.
The item type of SwitchTo meaning:
I: interface
[RouterD] display x25 switch-table svc dynamic
#1 (In: Serial2/0

SVC application of XOT

Network requirements
As shown in
between Serial 2/0 of Router A and Serial 2/0 of Router D. Configure SVCs and XOT.
Figure 142 Network diagram
Configuration procedure
Configure Router A:
1.
# Configure basic X.25.
<RouterA> system-view
[RouterA] interface serial 2/0
[RouterA-Serial2/0] link-protocol x25 dte ietf
[RouterA-Serial2/0] x25 x121-address 1
[RouterA-Serial2/0] x25 map ip 1.1.1.2 x121-address 2
[RouterA-Serial2/0] ip address 1.1.1.1 255.0.0.0
output 128
Local PR: 5
Reset times: 0
INTERRUPT 0/0
RNR 0/0 REJ 0/0
Substitute-src Substitute-dst CUD
H: hunt-group
Figure 142, set up a TCP connection between Router B and Router C to deliver data
Remote PS: 4 Remote PR: 5
T: xot
- SVC1024) <--> (Out: Serial2/1
356
SwitchTo(type/name)
I/Serial2/0
I/Serial2/1
I/Serial2/2
- SVC1 )