Enabling Rs-Dcc; Configuring A Dial String For The Dialer Interface; Assigning Physical Interfaces To The Dialer Bundle - HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Manual

Task

Enabling RS-DCC

Configuring a dial string for the dialer interface

Assigning physical interfaces to the dialer bundle

Configuring dial authentication for RS-DCC
Enabling RS-DCC
Step
Enter system view.
1.
Create a dialer interface and enter dialer
2.
interface view.
Set the remote username.
3.
Enable RS-DCC by creating a dialer bundle for
4.
the dialer interface.
Configuring a dial string for the dialer interface
In the RS-DCC approach to on-demand dial, the attributes of physical interfaces vary by dial string.
Therefore, DCC parameters must be configured on dialer interfaces and dial strings can be
configured only with the dialer number command. For each dialer interface, you can configure only
one dial string.
To configure a dial string for the dialer interface:
Step
Enter system view.
1.
Enter dialer interface view.
2.
Configure a dial string for calling a remote end.
3.
Assigning physical interfaces to the dialer bundle
A dialer bundle is a collection of physical interfaces with different priorities. When placing a call, DCC
selects a physical interface from the bundle in priority order.
To assign physical interfaces to the dialer bundle:
Step
Enter system view.
1.
Enter physical interface
2.
view.
Remarks
Required.
Required.
Required.
Required.
Command
system-view
interface dialer number
dialer user username
dialer bundle number
Command
system-view
interface dialer number
dialer number dial-number
Command
system-view
interface interface-type
interface-number
136
Remarks
N/A
N/A