HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Manual page 14

Internet Address is 200.1.1.2/16 Primary
Link layer protocol is SLIP
Output queue : (Urgent queuing : Size/Length/Discards)
Output queue : (Protocol queuing : Size/Length/Discards)
Output queue : (FIFO queuing : Size/Length/Discards)
Physical layer is asynchronous, Baudrate is 9600 bps
Last clearing of counters: Never
Last 300 seconds input rate 0.00 bytes/sec, 0 bits/sec, 0.00 packets/sec
Last 300 seconds output rate 0.00 bytes/sec, 0 bits/sec, 0.00 packets/sec
Input: 11753 packets, 147028 bytes
0 broadcasts, 0 multicasts
16 errors, 0 runts, 3 giants
1 CRC, 0 align errors, 0 overruns
0 dribbles, 0 aborts, 0 no buffers
12 frame errors
Output:11741 packets, 142014 bytes
0 errors, 0 underruns, 0 collisions
0 deferred
DCD=DOWN DTR=UP
[RouterB-Serial2/0] ping 200.1.1.1
PING 200.1.1.1: 56
Reply from 200.1.1.1: bytes=56 Sequence=1 ttl=255 time=103 ms
Reply from 200.1.1.1: bytes=56 Sequence=2 ttl=255 time=1 ms
Reply from 200.1.1.1: bytes=56 Sequence=3 ttl=255 time=1 ms
Reply from 200.1.1.1: bytes=56 Sequence=4 ttl=255 time=1 ms
Reply from 200.1.1.1: bytes=56 Sequence=5 ttl=255 time=10 ms
--- 200.1.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/23/103 ms
DSR=UP RTS=UP CTS=UP
data bytes, press CTRL_C to break
3
0/100/0
0/500/0
0/75/0