Configuring Frame Relay Fragmentation; Enabling The Trap Function; Displaying And Maintaining Frame Relay - HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Manual

Configuring frame relay fragmentation

"Configuring frame relay
See

Enabling the trap function

The trap function enables the frame relay module to report critical events to the information center.
You can configure the information center to output interesting trap messages to a destination (for
example, the console) for analysis. For more information about how to configure the information
center, see HPE FlexNetwork MSR Router Series Comware 5 Network Management and Monitoring
Configuration Guide.
To enable the trap function for the frame relay module:
Step
Enter system view.
1.
Enable trap for frame
2.
relay.
For more information about the snmp-agent trap enable fr command, see HPE FlexNetwork MSR
Router Series Comware 5 Network Management and Monitoring Command Reference.

Displaying and maintaining frame relay

Task
Display frame relay protocol
status on an interface.
Display the mapping table of
IPv4 protocol address and
frame relay address.
Display the mapping table of
IPv6 protocol address and
frame relay address.
Display receiving/sending
statistics of frame relay LMI
type messages.
fragmentation."
Command
system-view
snmp-agent trap enable fr
Command
display interface mfr
{ interface-number |
interface-number.subnumber } [ brief ]
[ | { begin | exclude | include }
regular-expression ]
display interface [ mfr ] [ brief
[ down ] ] [ | { begin | exclude |
include } regular-expression ]
display fr map-info [ interface
interface-type { interface-number |
interface-number.subnumber } ] [ |
{ begin | exclude | include }
regular-expression ]
display fr ipv6 map-info { static |
dynamic | all } [ interface interface-type
{ interface-number |
interface-number.subnumber } ] [ |
{ begin | exclude | include }
regular-expression ]
display fr lmi-info [ interface
interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
99
Remarks
N/A
Optional.
By default, trap is enabled
for frame relay.
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.