Displaying And Maintaining Bridging - HPE FlexNetwork MSR Series Comware 5 Layer 2 - Wan Access Configuration Manual

Step
Enter system view.
1.
Enable bridging.
2.
Enable a bridge-set.
3.
Enter interface view.
4.
Add the interface to the
5.
bridge-set.
Enable VLAN transparency.
6.

Displaying and maintaining bridging

Task
Display bridge set information.
Display information about
bridge-template interfaces.
Display bridge table information.
Display bridged traffic statistics.
Clear dynamic bridge table
entries.
Clear bridged traffic statistics.
Command
system-view
bridge enable
bridge bridge-set enable
interface interface-type
interface-number
bridge-set bridge-set
bridge
vlanid-transparent-transmit
enable
Command
display bridge information
[ bridge-set bridge-set ] [ |
{ begin | exclude | include }
regular-expression ]
display interface
bridge-template
interface-number [ brief ] [ |
{ begin | exclude | include }
regular-expression ]
display interface
[ bridge-template ] [ brief
[ down ] ] [ | { begin | exclude |
include } regular-expression ]
display bridge address-table
[ bridge-set bridge-set | dlsw |
interface interface-type
interface-number | mac
mac-address] [ dynamic | static ]
[ | { begin | exclude | include }
regular-expression ]
display bridge traffic
[ bridge-set bridge-set | dlsw |
interface interface-type
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
reset bridge address-table
[ bridge-set bridge-set | dlsw |
interface interface-type
interface-number ]
reset bridge traffic [ bridge-set
bridge-set | dlsw | interface
interface-type interface-number ]
293
Remarks
N/A
Bridging is disabled by default.
A bridge-set is disabled by
default.
N/A
No interface is in any bridge-set
by default.
VLAN transparency is disabled by
default.
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in user view.
Available in user view.