Enabling Cli; Enabling Telnet For Cli - AudioCodes Mediant 800B User Manual

Gateway & e-sbc
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

(logging)# syslog-ip 1111.1.1.1
Parameter 'SyslogServerIP' does NOT accept the IP-Address:
1111.1.1.1, illegal IPAddress.
Configuration failed
Command Failed!
"Invalid command" message: The command may not be valid in the current command
mode, or you may not have entered sufficient characters for the command to be
recognized. Use "?" to determine your error.
"Incomplete command" message: You may not have entered all of the pertinent
information required to make the command valid. Use "?" to determine your error.
7.2

Enabling CLI

By default, access to the device's CLI through Telnet and SSH is disabled. This section
describes how to enable these protocols.
7.2.1

Enabling Telnet for CLI

The following procedure describes how to enable Telnet. You can enable a secured Telnet
that uses Secure Socket Layer (SSL) where information is not transmitted in clear text. If
SSL is used, a special Telnet client is required on your PC to connect to the Telnet
interface over a secured connection; examples include C-Kermit for UNIX and Kermit-95
for Windows.
For security, some organizations require the display of a proprietary notice upon starting a
Telnet session. To configure such a message, see 'Creating a Login Welcome Message'
on page 63.
To enable Telnet:
1.
Open the CLI Settings page (Setup menu > Administration tab > Web & CLI folder >
CLI Settings).
2.
Configure the following parameters:
'Embedded Telnet Server': Select Enable Unsecured or Enable Secured (i.e,
SSL) to enable Telnet.
'Telnet Server TCP Port': Enter the port number of the embedded Telnet server.
'Telnet Server Idle Timeout': Enter the duration of inactivity in the Telnet session
after which the session automatically ends.
3.
Click Apply, and then reset the device with a save-to-flash for your settings to take
effect.
For a detailed description of the Telnet parameters, see 'Telnet Parameters' on page 976.
User's Manual
Mediant 800B Gateway & E-SBC
80
Document #: LTRT-10298

Advertisement

Table of Contents
loading

Table of Contents