3.5 Terminal Cover
n
Reattaching the Terminal Cover
After wiring the terminal board and other devices, double-check connections and reattach the terminal cover.
Refer to Wiring
the Main Circuit Terminal on page 90
and
Wiring the Control Circuit Terminal
on page
95
for details on wiring.
Figure 3.13 Reattaching the Terminal Cover
Note:
Connect the ground wiring first, then the main circuit wiring, and finally the control circuit wiring.
3
YASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual
71