Canon i-SENSYS MF6140dn User Manual page 1030

Cannot Use the Software After Upgrading the Operating System.
Uninstall the software for this machine before upgrading the operating system on your computer. Once the upgrade has
been complete, reinstall the software.
"Uninstalling the Software"
"Installing the MF Drivers and MF Toolbox"
"Installing the MF Drivers on the WSD Network (For Windows)"
The USB cable was connected before installing the MF drivers.
For Windows 8 (MF6180dw/MF6160dw/MF6150dw/MF6140dn)
The driver included with the OS (inbox driver) is installed.
If you installed it unintentionally, follow the steps below to delete it, and install the MF drivers.
1. Right-click the lower-left corner of the screen, select [Control Panel], and click [View devices and printers].
2. Right-click the icon for the machine.
3. Click [Remove device].
4. Remove the USB cable from the computer.
5. Install the MF drivers.
"Installing the MF Drivers and MF Toolbox"
For Windows 7/8
1. Remove the USB cable from the computer.
2. Install the MF drivers.
"Installing the MF Drivers and MF Toolbox"
For Windows XP/Vista
1. When the following screen appears, remove the USB cable from the computer.
For Windows XP:
For Windows Vista:
2. Click [Cancel].
If the dialog box closed after you removed the USB cable, proceed to the next step.
3. Install the MF drivers.
Downloaded from ManualsPrinter.com Manuals