Table of Contents
Advertisement
Configuring Ethernet Settings
1
Select <Menu> in the Home screen.
2
Select <Preferences>
●
If the login screen appears, enter the correct ID and PIN.
3
Select <Ethernet Driver Settings>.
4
Select whether to configure Ethernet settings automatically or manually.
●
If auto-detection is enabled, the machine detects and automatically sets the Ethernet communication mode
and the type that can be used.
Configuring Ethernet settings automatically
Select <On> in <Auto Detect>.
Configuring Ethernet settings manually
1
Select <Off> in <Auto Detect>.
2
<Communication Mode>
<Half Duplex>
Alternately sends and receives communication data. Select when the machine is connected to a
networking device using half duplex.
Setting Up
Ethernet is a standard for communicating data in a local area network (LAN). You can
set the communication mode and the Ethernet type. In general, the machine can be
used without changing the defaults (
you can change these settings to suit your network environment.
Home Screen(P. 126)
<Network>.
select the communication mode.
53
<Ethernet Driver Settings>(P. 481) ), but
Logging in to the Machine(P. 137)
3S21-010
Advertisement
Table of Contents
