GE AKTA start Maintenance Manual page 25

Maintenance action
Calibrate the UV flow cell
Calibrate the Conductivity cell
Pressure sensor zero offset
Replace the inlet filters
Replace the tubing and connectors
ÄKTA start Maintenance Manual 29060308 AD
3 Maintenance operations
3.1 Regular maintenance schedule
See section
Section 3.5.1 UV LED calibration, on
page 39
Section 3.11 Conductivity Monitor, on
page 68
Section 3.12 Pressure sensor , on
page 75
ÄKTA start Operating Instructions
ÄKTA start Operating Instructions
25