Injection Valve Kit - GE AKTA start Maintenance Manual

5.9

Injection valve kit

Introduction
Use the Injection valve kit to service the valve when the external parts and liquid distri-
bution parts are damaged, worn or blocked with salt deposits.
Replace the complete valve (see Section 5.8 Injection valve, on page 136) when internal
valve parts are damaged, worn or blocked with salt deposits.
Required tools
Tool
Torx driver
Instructions
Follow the instructions below to remove and replace the Injection valve kit.
Step
1
ÄKTA start Maintenance Manual 29060308 AD
Action
Make sure that the valve is in position: Inject, and then disconnect the inlet
and outlet tubing from the ports.
5 Removing and replacing modules
Dimension
T10

5.9 Injection valve kit

139