Tools And Equipment Needed; Esd Precautions - Oracle Sun Server X4-4 Installation Manual

Callout
5
6
7
Required server components and most options are installed at the factory. However, some
ordered options might be packaged separately. If possible, install optional components before
installing the server in a rack. For instructions for installing server options, see
Component Installation" on page

Tools and Equipment Needed

To install the system, you need the following tools:
No. 2 Phillips screwdriver
■
ESD mat and grounding strap
■
You also need a system console device, such as one of the following:
Workstation
■
ASCII terminal
■
Terminal server
■
Patch panel connected to a terminal server
■

ESD Precautions

Electronic equipment is susceptible to damage by static electricity. Use a grounded antistatic
wrist strap, foot strap, or equivalent safety equipment to prevent electrostatic damage (ESD)
when you install or service the server.
Caution -
which can permanently disable the system or require repair by authorized service technicians,
place components on an antistatic surface, such as an antistatic discharge mat, an antistatic bag,
or a disposable antistatic mat. Wear an antistatic grounding strap connected to a metal surface
on the chassis when you work on system components.
Description
RJ-45 to DB-9 crossover adaptor
Printed documents
2 AC power cords
32.
Equipment damage. To protect electronic components from electrostatic damage,
Tools and Equipment Needed
"Optional
Preparing to Install the Server 31