Log In To Oracle Ilom Using A Remote Ethernet Connection - Oracle Sun Server X4-4 Installation Manual

Log In to Oracle ILOM Using a Remote Ethernet Connection

3. Log in to the Oracle ILOM command-line interface (CLI) using an Administrator
account.
Oracle ILOM displays a default command prompt (->), indicating that you have successfully
logged in to Oracle ILOM.
Log In to Oracle ILOM Using a Remote Ethernet
Connection
This procedure requires that you have an Oracle ILOM Administrator account and that you
know the IP address or hostname of the server SP. Steps for logging in using the command-line
interface (CLI) or web interface are described below.
Note -
password is changeme. If this default Administrator account has since been changed, contact
your system administrator for an Oracle ILOM user account with Administrator privileges.
You must have already connected a network cable from your management network to the NET
Before You Begin
MGT port on the back of the server. For more information on this connection, see
Server" on page
1. Establish a connection to Oracle ILOM using one of the following methods:
From the Oracle ILOM CLI, initiate a secure shell session. Enter the
■
command:
ssh username@host
Where username is the user name of an account with Administrator privileges (the default
administrator account is root) and host is either the IP address or hostname (when using
DNS) of the server SP.
The Oracle ILOM password prompt appears.
Password:
From the Oracle ILOM web interface, type the IP address of the server in the
■
address field of your web browser and press Enter.
56 Sun Server X4-4 Installation Guide • October 2015
The default Oracle ILOM Administrator account shipped with the server is root and its
49.
"Cable the