Oracle Sun Server X4-4 Installation Manual page 52

Connect the Power Cords
After a few minutes, the system OK indicator slowly flashes the standby blink pattern (0.1
■
seconds on, 2.9 seconds off), indicating that the SP (and Oracle ILOM) is ready for use.
Note that the server is not initialized or fully powered on at this point.
Callout
1
2
Do not fully power on the server until instructed to do so. Proceed to the next
3.
tasks.
"Connecting to Oracle ILOM" on page 53
Next Steps ■
"Setting Up Software and Firmware Using Oracle System Assistant" on page 71
■
"Configure Server Drives for OS Installation" on page 79
■
52 Sun Server X4-4 Installation Guide • October 2015
Description
System OK indicator
SP OK indicator