Configure Raid With A Sun Storage 6 Gb Sas Pcie Raid Internal; Hba - Oracle Sun Server X4-4 Installation Manual

Configure RAID With a Sun Storage 6 Gb SAS PCIe RAID Internal HBA
The RAID Configuration screen appears and lists the RAID volume as the current boot device.
If you want to delete a volume, select it and click the Delete Volume button.
10.
This completes the RAID configuration task.
11. Do one of the following:
To select any other Oracle System Assistant task, click the corresponding button in the
■
left panel menu. For example, after configuring RAID, you might want to select the Install
OS task and perform an operating system installation.
To return to the Oracle System Assistant System Overview screen, click System
■
Information in the left menu panel.
To quit Oracle System Assistant, click Exit.
■
"Set Up an Operating System and Drivers" on page 104
Next Steps ■
Configure RAID With a Sun Storage 6 Gb SAS
PCIe RAID Internal HBA
For systems with the Sun Storage 6 Gb SAS PCIe RAID Internal HBA, if you are not using
a preinstalled OS from Oracle you must create a bootable volume on a drive before installing
an OS. The system does not recognize a drive unless it has a volume on it created by the Sun
Storage 6 Gb SAS PCIe RAID Internal HBA.
If there is more than a single volume on the drive that you intend to use as the boot drive, the
volume that the OS will be installed on should be set as the boot device.
86 Sun Server X4-4 Installation Guide • October 2015