Oracle Sun Server X4-4 Installation Manual page 42

Install Server Into the Slide-Rail Assemblies
4. Insert the mounting brackets into the slide-rails, then push the server into the
rack until the mounting brackets encounter the slide-rail stops (approximately 12
inches, or 30 cm).
Caution -
ensure that both the top and bottom mounting lips of the mounting brackets are inserted into
the slide-rail. The server should slide forward and backward easily if correctly installed. If the
unit does not slide easily, ensure that each mounting lip is inserted properly. If the mounting
brackets are not inserted properly, the unit may fall when removing it from the rack.
5. Simultaneously push and hold the green slide-rail release buttons on each
mounting bracket while you push the server into the rack. Continue pushing
until the slide-rail locks (on the front of the mounting brackets) engage the slide-
rail assemblies.
42 Sun Server X4-4 Installation Guide • October 2015
Equipment damage or personal injury. When inserting the server into the slide-rail,