If the system is not in standby mode but is fully powered on, you will be
Note -
prompted to shut it down first. See:
Shutdown" on page
To continue to launch Oracle System Assistant, click Yes.
4.
Wait while the server initializes. This might take several minutes.
The server powers on.
■
Oracle System Assistant application boots.
■
Oracle System Assistant main screen appears.
■
5.
Use Oracle System Assistant to perform the tasks shown in the following table
in order.
Launch Oracle System Assistant Using the Oracle ILOM Web Interface
"Use the Oracle ILOM Web Interface for Orderly
137. Once the system is powered off, continue with this step.
Setting Up Software and Firmware Using Oracle System Assistant
73
Need help?
Do you have a question about the Sun Server X4-4 and is the answer not in the manual?
Questions and answers