Oracle Sun Server X4-4 Installation Manual page 123

If needed, at the GRUB menu you can type e to edit commands before booting, or type c
Note -
for a command line.
5.
When prompted, enter the root password and the Oracle VM Agent password.
For example:
Starting OVM console server:
Starting OVM ovmwatch services:
Starting ovs-agent:
Starting ovs-agent services:
Configuring Oracle VM...
Enter new root password:
Confirm password:
Enter new Oracle VM Agent password:
Confirm password:
Configuring network.
The prompts for the root and the Oracle VM Agent passwords are only displayed the
Note -
first time you boot the Oracle VM Server.
6. Follow the prompts to select the onboard network interface controller (NIC)
to configure and enter other required configuration information related to the
network.
This tool is used to select the NIC used by the OVM Manager.
You can exit at any time by pressing CTRL-C.
Here's the list of current available network interfaces.
eth0 eth1 eth2
Please select interface(s) to be used for OVM management.
These interfaces will be configured for redundancy.
eth1
7. If all of the configuration settings are correct, type
Enter to save the settings.
When all settings have been entered and saved, the system loads an Oracle VM Server Console
session. For example:
|Oracle VM Server 3.2.X Console [Alt-F2 for login console]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
eth3
Configuring the Preinstalled Oracle VM Software
Configure the Preinstalled Oracle VM Server
when prompted and press
Y
|
123