Oracle Sun Server X4-4 Installation Manual page 115

Are you sure you want to start /SYS (y/n)? y
Starting /System
To restart the server, use one of the following methods:
■
From the Oracle ILOM web interface, click Host Management > Power
■
Control, and then select Reset from the menu.
From the ILOM CLI, type:
■
->
reset /System
When prompted, type
Are you sure you want to reset /System (y/n)? y
Performing hard reset on /System
The server begins the host boot process.
From Oracle ILOM, start the host console using one of the following methods:
3.
From the Oracle ILOM web interface, click Remote Control > Launch Remote
■
Console.
From the Oracle ILOM CLI, type:
■
->
start /HOST/console
When prompted, type
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
After the server boots, the GRUB menu appears. For example (your preinstalled version might
be different):
GNU GRUB version 0.97 (612K lower / 2082932K upper memory)
+--------------------------------------------------------------------------------+
Oracle Linux Server Unbreakable Enterprise Kernel (3.8.13-16.2.1.el6uek.x86_64)
Oracle Linux Server Red Hat Compatible Kernel (2.6.32-431.el6.x86_64)
+--------------------------------------------------------------------------------+
to confirm:
y
to confirm:
y
Configuring the Preinstalled Oracle Linux OS
Configure the Preinstalled Oracle Linux OS
115