Configuring The Preinstalled Oracle Solaris Os; Oracle Solaris Os Configuration Worksheet - Oracle Sun Server X4-4 Installation Manual

Configuring the Preinstalled Oracle Solaris OS

At initial release, the Sun Server X4-4 offers the option of a preinstalled Oracle Solaris
11.1.x operating system (OS) image on your server. If you purchased this option, finish the
installation by configuring the preinstalled software. The preinstalled OS image contains all of
the necessary drivers for your server model.
Note -
OS, see the Sun Server X4-4 Product Notes at http://www.oracle.com/goto/X4-4/docs.
Perform the procedures in the following sections in the order listed:
Step
1
2
3

Oracle Solaris OS Configuration Worksheet

Before you start to configure the preinstalled Oracle Solaris Operating System, review the
applicable limitations on RAID configurations. Then complete the worksheet for the Oracle
Solaris configuration.
Before you begin configuring the operating system, use the configuration worksheet in the
following table to gather the information that you will need. You need to collect only the
information that applies to your application of the system.
For up-to-date information about supported versions of the preinstalled Oracle Solaris
Task
Fill out the configuration worksheet for your server
environment.
Configure the preinstalled Oracle Solaris OS.
Review the Oracle Solaris OS documentation for
information about registering, updating and using
the Oracle Solaris OS.
Links
"Oracle Solaris OS Configuration
Worksheet" on page 107
"Configure the Preinstalled Oracle Solaris
Operating System" on page 110
"Oracle Solaris Operating System
Documentation" on page 112
Configuring the Preinstalled Oracle Solaris OS 107