Oracle Sun Server X4-4 Installation Manual page 122

Configure the Preinstalled Oracle VM Server
From the Oracle ILOM CLI, type:
■
->
When prompted, type
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
After the server boots, the GRUB menu appears. For example (your preinstalled version might
be different):
GNU GRUB version 0.97 (612K lower / 2082932K upper memory)
+--------------------------------------------------------------------------------+
Oracle VM Server-ovs (xen-4.1.3 2.6.39-300.32.6.el5uek)
Oracle VM Server-ovs serial console (xen-4.1.3 2.6.39-300.32.6.el5uek)
+--------------------------------------------------------------------------------+
Note -
4. From the GRUB menu, do one of the following:
If you are using the Oracle ILOM CLI, use the up/down arrow keys to select
■
the serial console option and press Enter.
If you are using Oracle ILOM Remote Console Plus (or a direct video port
■
connection), use the up/down arrow keys to select the option that does not
specify "serial console" and press Enter.
Note -
remainder of the OS configuration process, the system will direct output to the serial port and
not to the video port.
122 Sun Server X4-4 Installation Guide • October 2015
start /HOST/console
to confirm:
y
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, 'a' to modify the kernel arguments
before booting, or 'c' for a command-line.
The highlighted entry will be booted automatically in 5 seconds.
When the GRUB menu appears, you have five seconds to make a selection.
If you do not make a selection, serial console is used by default. This means that for the