Oracle Sun Server X4-4 Installation Manual page 63

2. Select ILOM Administration > Connectivity from the navigation tree on the left.
The Network Settings page appears. The settings configured on your device are displayed.
Perform the network configuration instructions that apply to your network
3.
environment:
IPv4: To allow the DHCP server on your network to assign network settings,
■
ensure that the DHCP radio button is selected and click Save.
IPv4: To assign network settings, select the Static radio button and fill in the
■
IP Address, Netmask, and Gateway fields and click Save.
IPv6: To configure an auto-configuration option, ensure that the Enabled
■
check box next to the State property is selected. Then, select an auto-
configuration value and click Save.
Note - You can enable the Autoconfig Stateless option to run at the same time as when the
option for DHCPv6 Autoconfig Stateless is enabled or as when the option for DHCPv6
Autoconfig Stateful is enabled.
Modify Network Settings From the Oracle ILOM Web Interface
Connecting to Oracle ILOM 63