Powering Off The Server For Orderly Shutdown - Oracle Sun Server X4-4 Installation Manual

Note -
Utility.
3. Once POST completes, the system attempts to boot from either the default boot
device, or the temporary boot device selected from the BBS Popup menu. If
available, an operating system is loaded.
The system is ready for use.

Powering Off the Server for Orderly Shutdown

Use the procedures in one of the following sections to perform an orderly shutdown. These
procedures cause ACPI-enabled operating systems to perform an orderly shutdown of the
operating system. Servers not running ACPI-enabled operating systems shut down to standby
power mode immediately.
Note -
panel of the server.
"Use the Power Button for Orderly Shutdown" on page 136
■
If the boot mode is UEFI, some of these options are only be available in the BIOS Setup
To completely power off the server, you must disconnect the power cords from the back
Powering Off the Server for Orderly Shutdown
Controlling System Power and Viewing BIOS Messages 135