Connecting A Usb Memory To The Computer Unit - ABB IRC5 Product Manual

2 Installation and Commissioning, IRC5

2.7.2. Connecting a USB memory to the computer unit

2.7.2. Connecting a USB memory to the computer unit
Location DSQC639
A USB memory may be connected to either one of the USB ports on the computer unit. The
USB ports are shown in the figure below:
xx0600002895
A
Connection
82
USB 1, 2 The USB connectors provide two legacy USB 2.0 ports supporting High
Speed/Full Speed/Low Speed (HS/FS/LS)
Action
1. Remove the end cover on the USB memory and connect
it to the connector.
Do not disconnect the USB memory approx. 10 seconds
after connecting it.
2.
CAUTION!
CAUTION!
Handling of USB memory is described in Operating
manual - IRC5 with FlexPendant, section File Managing.
Info/illustration
The USB memory and its
contents may now be
accessed from the computer
unit just as any other hard
drive unit.
3HAC027707-001 Revision: D