ABB IRC5 Product Manual page 40

2 Installation and Commissioning, IRC5
2.4.1. Installation, IRC5 Panel Mounted Controller
Continued
NOTE!
The Control Module and Drive Module must be mounted according to figure above.
NOTE!
Do not mount the Control Module or Drive Module on a painted surface.
The modules framing must be connected to earth.
NOTE!
The Control Module and Drive Module must be mounted and connected to the same earth.
Procedure
The following procedure details how to install the IRC5 Panel Mounted modules.
38
Action
1. Fit the module on pre-mounted M5 screws (4 pcs).
2. Secure the module with new M5 screws (4 pcs).
3. Fasten the module (M5 screw, 8 pcs)
Note/Illustration
xx0600003452
• A: M5 screws (4 pcs)
xx0600003453
• B: M5 screws (4 pcs)
Tightening torque 4,5 Nm.
3HAC027707-001 Revision: D