ABB IRC5 Product Manual page 78

2 Installation and Commissioning, IRC5
2.5.11. Connecting a Limit switch override push button
Continued
76
Action
2. Attach two additional contact blocks on the
existing push button (Motors on).
3. Connect wires from the contact blocks to
the connector according to the diagram to
the right.
4. Fit the connector to the X23 connector on
the contactor interface board.
Note/illustration
A
B
C
xx0500002553
• A: Additional contact blocks
• B: Existing contact, lamp blocks
• C: Holder
• D: Push button
xx0500002556
xx0600003250
3HAC027707-001 Revision: D
D