ABB IRC5 Product Manual page 66

2 Installation and Commissioning, IRC5
2.5.6. Connecting a PC to the service port
Continued
64
Action
2. Use the delivered category 5 Ethernet
crossover boot cable with RJ45
connectors.
3. Connect the boot cable to the network port
of your PC.
4. Connect the boot cable to the service port
on the computer unit.
Illustration
The cable is delivered in the RobotWare
product box.
xx0400000844
• A: network port
The placement of the network port may
vary depending on the PC model.
3HAC027707-001 Revision: D