4 Repair activities, controller IRC5
4.18. Replacement of brake resistor bleeder
Continued
Refitting
The following procedure details how to refit the brake resistor bleeder
172
Action
7. Remove the attachment screws for the
brake resistor bleeder unit and remove the
unit.
8. Remove the attachment nuts.
9. Remove the bleeder.
Action
1. Refit the bleeder and attachment nuts.
2. Refit the brake resistor bleeder unit to the Drive Module.
3. Refit the attachment screws (10 pcs)
4. Reconnect the brake resistor bleeder cables.
Note/Illustration
xx0600003252
•
A: attachment screws (10 pcs)
xx0600003329
xx0600003330
•
A: bleeder
•
B: attachment nut (2 pcs)
Note/Illustration
Continues on next page
3HAC027707-001 Revision: D