ABB IRC5 Product Manual page 114

4 Repair activities, controller IRC5
4.3.2. Replacement of customer I/O power supply, IRC5
Continued
Refitting
The procedure below details how to refit the customer I/O power supply.
112
Action
2. Disconnect all connectors.
3. Remove the upper and lower attachment screws.
4. Remove the power supply unit.
Action
1.
DANGER!
Before any work inside the cabinet, please observe the
safety information in section
the main power has been switched off! on page
2. Refit the new power supply unit.
DANGER - Make sure that
26.
Note/Illustration
NOTE!
Make a note of any connec-
tions.
xx0400000908
• A: attachment screw
(2 pcs)
Note/Illustration
Continues on next page
3HAC027707-001 Revision: D