Loading The Default Ip Settings; Tcp Port Configuration; Loading The Default Tcp Port Settings; Support - Lightware UMX4x4-Pro User Manual

6.6.3. Loading the default IP settings

Step 1. Click on the Load Default button. Now the factory default IP address, Subnet Mask
Step 2. To save the settings, click on Apply Settings button.
Step 3. The default fix IP settings are applied:

6.6.4. TCP Port Configuration

The user can configure the TCP port number, which is used to communicate with the matrix
router through LAN. The input box initially contains the current setting.
Step 1. Type the desired TCP port number into the input box
Step 2. Press the Apply Settings button. The new port will be active after the next

6.6.5. Loading the default TCP Port settings

Step 1. Click on Load Default button. Now the factory default value is in the input box, but
Step 2. To save, click on Apply Settings button. The new port will be active after the next
6.7.

Support

For technical support, please don't hesitate to contact Lightware Visual Engineering at
support@lightware.eu.
Page 78 / 129
and Gateway address is loaded into the input boxes. But they are not saved.
IP Address:
Subnet Mask:
Default Gateway:
connection.
it is not saved.
connection.
192.168.254.254
255.255.0.0
0.0.0.0
Section 6. Web control – Using built-in website